MIMAKI JV5-130S Especificaciones descargar pdf (Pagina 68)

2 Before Use

2-32

MACHINE SET functions

Function name Sub function Setting value Function

DRY & EXHST.

FAN (p. 6-19)

DRYNESS FAN STOP TIME 0 to 240 Min, CONTINUE Set the operation of the dryness fan.

[STOP TIMER] sets the time from

the completion of the printing to the

stopping of the rotation of the fan.

[RENEW] switches over the current

status of the fan.

RENEW ON, OFF

Outside EXHST

Displays about dry-

ness fan interlock if

it is interlocked.

Press [FUNC-

TION] key to

switch to indepen-

dent operation, and

to set items on the

right.

STOP TIME 0 to 240 Min, CONTINUE Set the operation of the outside

exhaust fan.

[STOP TIMER] sets the time from

the completion of the printing to the

stopping of the rotation of the fan.

[RENEW] switches over the current

status of the fan.

[SETUP INTERLOCK] interlocks

the operation to the dryness fan.

RENEW ON, OFF

SETUP INTER-

LOCK

Built-in EXHST

Displays about dry-

ness fan interlock if

it is interlocked.

Press [FUNC-

TION] key to

switch to indepen-

dent operation, and

to set items on the

right.

STOP TIME 0 to 240 Min, CONTINUE Set the operation of the built-in

exhaust fan.

[STOP TIMER] sets the time from

the completion of the printing to the

stopping of the rotation of the fan.

[RENEW] switches over the current

status of the fan.

[SETUP INTERLOCK] interlocks

the operation to the dryness fan.

RENEW ON, OFF

SETUP INTER-

LOCK

DRYNESS FEED (p. 6-20) ON, OFF Change the feed operation after

printing.

CONFIRM. FEED

(p. 6-20)

Press [FUNC-

TION] key to set

items on the right.

BACK FEED ON, OFF Set whether or not to perform feed-

ing the media after test printing for

checking of the printing result.

OFF

PRE-FEED

METHOD

(p. 6-21)

[Only when dedi-

cated sublimation

transfer ink is used.]

FORE (**mm)

Press [FUNC-

TION] key to set

items on the right.

LENGTH 10mm to 1000mm Switches the pre-feed operation.

FORE&BACK

HEATER SETUP (p. 6-21) STD, set -5°C, set -10°C, set -15°C,

set -20°C

Change the temperature range of the

post-heater that determines whether

the temperature is reached.

MEDIA CUT

(p. 6-21)

ASSIGN CUT KEY ON, OFF Allocate [>] key to DIRECT CUT

key of MEDIA CUT.

MOVE.DROP MEDIA ON, OFF

Switch the dropping operation of the

media after cutting media.

TIME SET (p. 6-21) ON, OFF Set the date and time on the printer.

UNIT SETUP

(p. 6-22)

TEMP. °C or °F Change the units of temperature,

length and area to be used with the

printer.

LENGTH mm or inch

STAMP SETUP (p. 6-22) ON, OFF Make settings for outputting the date

and time and printing conditions

after printing.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 291 292

Comentarios a estos manuales

Sin comentarios

MIMAKI JV5-130S Especificaciones Pagina 68

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo MIMAKI JV5-130S