MIMAKI UJF-706 Especificaciones Pagina 53
- Pagina / 184
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Head cleaning
2-17
2
Basic Operations
Cleaning by Hard2
1
When <LOCAL> is dipslayed, press the
key.
2
Select [hard2] with the key,
and press the key.
3
Select execution of cleaning for each
head.
(1) Select the head with the key.
(2) Select execution of cleaning with the key.
• Select execution of cleaning for the all heads.
Execute Cleaning ：The ink cartridge color
being set is displayed.
Not Execute Cleaning： “ * ” is displayed.
4
Press the key.
• Cleaning starts.
• When the cleaning is completed, <LOCAL> is displayed.
5
Execute the test drawing, and check the pattern. (
P.2-13)
• Repeat cleaning and test drawing until the drawn pattern becomes normal.
• With one cartridge of washing liquid, “hard” or “hard2” cleaning can be performed once a day
for about one month.
• If the washing liquid cartridge cannot be used because “NO CARTRDG” or “WRONG WASH
CART.” occurred, you cannot perform cleaning “hard”.
<LOCAL . 1>
CLEANING
CLEAN I NG
TYPE : ha r d2
ENTER
CLEAN I NG
COLOR : MM
C
CYYKKWWSS
CLEAN I NG
COLOR : MM
*
CYYKKWWSS
ENTER
- MIMAKI ENGINEERING CO., LTD 1
- TABLE OF CONTENTS 2
- CHAPTER 6 Appendix 6
- Requests 8
- FCC Statement (USA) 8
- CDRH REGULATION 9
- Foreword 10
- For safe operation 11
- Never do the following 13
- Power supply and voltage 14
- Precautions for use 15
- About UV light 16
- About hot parts 16
- About cleaning 16
- About firing and smoking 16
- Notices for installation 17
- CHAPTER 1 19
- Before Use 19
- Installing this machine 20
- Moving this machine 21
- Configuration and Function 22
- Operation Panel 24
- Flushing Box 25
- UV power supply 26
- Connecting the cables 27
- UV irradiation device 28
- Setting the ink cartridge 29
- How to shake an ink cartridge 30
- About Media 34
- CHAPTER 2 37
- Basic Operations 37
- Operation flow 38
- Head cleaning 39
- Drawing an image from 39
- Turning the power off 39
- Turning the power ON/OFF 40
- <LOCAL> appears 41
- If hot water turned cool 42
- Fill ink into the subtank 43
- Turning the power OFF 44
- When turning the power OFF 46
- Setting media 47
- Press the key 48
- Test drawing 49
- Cleaning by Hard 51
- Cleaning by Wiping 52
- Cleaning by Hard2 53
- Drawing an image from data 54
- Cancelling the drawing 55
- When drawing stops 55
- Use the Copy Function 56
- About covers 57
- CHAPTER 3 59
- Useful Function 59
- Changing origin 60
- Adjusting head gap 62
- Checking head gap 63
- Reset the set value 66
- Setting the print condition 68
- Setting list 69
- Setting media compensation 70
- Setting the print method 72
- Registering head gap value 74
- • Setting Value: OFF, 1 to 9 78
- Setting the priority 79
- Setting Value: 0.0 to 2.0s 80
- Initializing the settings 81
- Turning OFF the UV lamp 82
- Setting time 87
- Setting Machine name 88
- Change the print quality 89
- Item Description 90
- For the information displayed 91
- Other useful functions 92
- CHAPTER 4 95
- Maintaining 96
- Cleaning exterior surfaces 97
- Ink cartridge 98
- Ink cartridge trouble 99
- Washing cartridge 100
- Cleaning the flushing box 101
- Flushing box 102
- How to care 103
- Carriage 104
- Main power switch 104
- Front lower left cover 104
- Front Lect cover 104
- FUNCTION 106
- Press the key to finish 111
- If blur or missing remains 118
- Subtank Maintenance 119
- Wiper cleaning 120
- Refill antifreeze liquid 122
- Refilling antifreeze liquid 123
- Open the front left cover 124
- Remove the UV lamp filter 124
- Remove the lid 128
- Remove the filter 128
- Articles required for 130
- Replacing UV lamp 132
- !UV LAMP 134
- LAMP CHANGE 134
- Cleaning of the Ionizer 139
- Attach the ionizer FAN 140
- Close the front right cover 140
- Daily Maintenance 141
- CHAPTER 5 143
- In Case of Trouble 143
- The power is not turned on 144
- Data is not drawn 144
- Message appears 144
- Problems of drawing result 145
- Nozzle clogging 145
- Troubles displaying messages 146
- Error message 148
- Message Solution 150
- CHAPTER 6 157
- Appendix 157
- Specifications 158
- Specifications for ink 159
- Position of the warning label 160
- Function Flowchart 162
- GAP CHECK 164
- MAINTENANCE 164
- MACHINE SETUP 164
- To P6-12 166
- From P6-10 168
- * * GAP CHECK * * 171
- PLEASE WA I T 171
- PLEASE CLOSE 171
- THE FRONT COVER 171
- To P6-18 172
- From P6-16 174
- To P6-22 176
- From P6-20 178
- D202102-20-01022013 183
- FW : 2.2 184
Relacionado con productos y manuales para Impresión y escaneo MIMAKI UJF-706
Impresión y escaneo MIMAKI JV3-130SPII Especificaciones
(142 paginas)
(142 paginas)
Impresión y escaneo MIMAKI JV5-130S Especificaciones
(292 paginas)
(292 paginas)
Impresión y escaneo MIMAKI JV5-320S Especificaciones
(130 paginas)
(130 paginas)
Impresión y escaneo MIMAKI JV33-160 Especificaciones
(202 paginas)
(202 paginas)
Impresión y escaneo MIMAKI JV3-75SPII Especificaciones
(150 paginas)
(150 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.049 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales