MIMAKI UJF-3042HG Manual de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 73
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
71 / 72
4-4. Note on Glossy Print of UJF-3042
About Media
You might not be able to print smooth gloss by the media you use. Please confirm Glossy Print by the media you use
beforehand.
About pass
To perform Glossy Print of clear liquid, it is necessary to print with the most suitable number of passes according the
resolution of feeding direction.
When performing Glossy Print on the surface with Glossy Print/Emboss Print in RasterLinkPro5, the number of
passes selected in the print mode is used for the color image, the special color image (white), the clear image (Matte
Print) during Emboss Print and UV irradiation, however, when performing Glossy Print, the pass below is used
(RasterLinkPro5 changes the pass automatically.)
No Printing Resolution of
Feeding Direction
Pass
1 600 Dpi 4
2 900 Dpi 6
3 1200 Dpi 8
About density
When perform Glossy Print of clear liquid, the density and the media affect the image quality. In addition, when
making the surface glossy in the Emboss Print, the number of printings also affects. The recommended setting
values under the checked conditions are as below:
Profile media name: Lumirror WhiteBackv3.1
Ink: LH-100 ink
Others: Clear liquid was discharged on the part printed with color ink of LH-100 ink.
Emboss Print (Glossy Print on surface) Glossy Print
When density is lower When density is 100%
No Printing
Resolution
Pass
Dot size
(L, M, S)
Pass Density Pass Density No. of printings
Pass Density No. of printings
1 720 x 600VD 16 3,2,1 4 95% 4 95% 2,4,6,8,10 4 100% 2,4,6,8,10
2 720 x 900VD 24 3,2,1 6 70% 6 70% 2,4,6 6 100% NG
3 720 x 1200VD 32 3,2,1 8 70% 8 70% NG 8 100% NG
4 1440 x 1200VD 32 3,2,1 8 85% 8 85% NG 8 100% NG
Profile media name: UV-PETv3.1
Ink: LH-100 ink
Others: Clear liquid was discharged on the part printed with color ink of LH-100 ink.
Emboss Print (Glossy Print on surface) Glossy Print
When density is lower When density is 100%
No Printing
Resolution
Pass
Dot size
(L, M, S)
Pass Density Pass Density No. of printings
Pass Density No. of printings
1 720 x 600VD 8 3,2,1 4 95% 4 95% NG 4 100% 2,4,6
2 720 x 900VD 12 3,2,1 6 80% 6 80% 4,6,8,10 6 100% NG
3 720 x 1200VD 16 3,2,1 8 80% 8 80% 2,4 8 100% NG
4 1440 x 1200VD 16 3,2,1 8 100% 8 100% NG
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73

Comentarios a estos manuales

Sin comentarios