MIMAKI UJF-3042HG Manual de usuario descargar pdf (Pagina 31)

31 / 72

3-4-3 Perform Matte Print.

The method to perform Matte Print of clear liquid is explained. (Here, it is based on the premise that the basic

setting explained in 3-4 “Create the single job of clear image.” has been completed.)

Select [Print Condition] - [UV

Mode].

Select “Matte Print and

Irradiation” of “Clear Liquid

Irradiation Mode”.

Set “Illuminance” at your wi

ll.

Set the number of “Additional

UV Irradiation” and “Illuminance”

at your will.

Depending on the density of

clear liquid, curing may not be

enough. In such a case, set the

Illuminance higher. Or, you can

specify the number of Additional

UV Irradiation to one to three and

perform curing later.

Hint

Click the [OK] button to

terminate the image edit screen.

Select the jo

b in the [Job List]

and right-click. Then, select [RIP

and Print] to perform printing.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 72 73

Sin comentarios

MIMAKI UJF-3042HG Manual de usuario Pagina 31